How to MakeComputerProblem Solutions

Windows Could Not Finish Formatting Solution 2023

Windows could not finish formatting If you want to get a definite result, try all the steps.

Windows could not finish formatting If you want to get a definite result, try all the steps.

Windows Could Not Finish Formatting Error

We have encountered a lot in our daily lives Windows could not finish formatting error is enough to drive anyone crazy. In fact, it is a very simple problem and the solution is also very simple.

But there is also the issue that every failed to finish formatting error you cannot successfully format the storage unit you bought. This is because some computer storage devices, such as flash drives, fail prematurely and some failures are irreparable.

But of course, we can't understand this without trying. That's why I'm here Windows could not finish formatting I will provide a few workarounds for the error, which you will try on your storage to try to resolve the issue.

But if these methods are not effective, you can contact your nearest trash bin. The point is that not all USB flash drives or SD cards are recoverable. Some have a software failure and some have a hardware failure.

Biz burada yazılımsal hatası olan depolama birimlerine yöneleceğiz. %70 oranında başarılı olabileceğimizi düşünüyorum. İnternet üzerinde çokça bu konuya değinilmiş fakat adam akıllı bir çözüm sunan bulamadım.

Solution 1 : Format from your computer's Storage Management Unit

  • Located on the desktop My Computer Right click on the icon.
  • Manage Choose.
  • In the window that appears To Disk Management Enter.
  • Right-click on the USB stick or SD card you have inserted. And click delete unit Say it.
How to Delete Windows Formatting Volume
Windows Couldn't Finish Formatting
  • After deleting the volume, right-click again New Unit Say it.
  • At this step, click Next to format the storage. The only thing to pay attention to here is if the flash drive has a size higher than 2gb, FAT32to select

Solution 2: Format Using Command System (cmd)

  • Click on the start menu at the far left and bottom of the desktop.
  • Type cmd or command system in the search bar.
  • Right-click on the command system icon and select Run as Administrator Choose.
Windows Could Not Finish Formatting CMD
Windows Couldn't Finish Formatting
  • When you open the command system, type the following code and enter Do it.
diskpart
Windows Could Not Finish Formatting Diskpart
Windows Couldn't Finish Formatting
  • Then, the command system is called "list disk" and enter.
list disk
Windows Failed to Finish Formatting Formatting with Diskpart
Windows Couldn't Finish Formatting
  • As you can see above list disk and the storage units connected to our computer are listed. After that you can type "select disk 1" to proceed.
Select Disk you need to pay attention to when writing Select diskthen the number you type should be the number that indicates your usb memory.
select disk 1
Windows Couldn't Finish Formatting Select Disk with Diskpart
Windows Couldn't Finish Formatting
  • Select disk 1 and we have selected disk 1. Now, we will type "clean" command to delete the section information.
clean
  • Enter the following code to create the partition of the storage volume you failed to format.
create partition primary
  • Use the code below to activate the section you created.
active
  • Finally, we need to use the following code to define a letter for our drive.
assign
Windows Could Not Finish Formatting Solution
Windows Couldn't Finish Formatting
  • AssignAfter the " command, the partition will be created. A window will then open and the "Format Disk" will appear. You can format our storage unit by clicking on it.

Solution 3: Format Using Low Level Format Tool Program

Low level format tool you need to download the licensed version of the program. You can easily find the licensed version on the internet. It is a program that provides a solution to the Windows could not finish formatting error.

  • Open the program and proceed by selecting the storage you want to Format.
Windows Failed to Finish Formatting Low Level Format Tool
Windows Couldn't Finish Formatting
  • Then "Low Level Format" tab and start the format process.
Windows Failed to Finish Formatting Low Level Format Tool
Windows Couldn't Finish Formatting
  • This screen will keep you waiting for a while. Do not worry and wait for the flash drive or SD card to be formatted.

Solution 4: Format Using HP USB Disk Storage Format Tool Program

This program is a free usb formatting program provided by hp. You can also use this program Windows Couldn't Finish Formatting to troubleshoot this error.

  • You can find this program everywhere because it is available for free. To go directly to the download page here click here.
  • Right-click on the downloaded program and select "Run as Administrator" you say.
Windows Could Not Finish Formatting HP Usb Disk
  • Then select your USB stick and start the formatting process.
Windows Couldn't Finish Formatting Solution With HP USB Disk
Still more Windows Couldn't Finish Formatting error, continue following the instructions below.

Solution 5: Format Using AOMEI Partition Assistant Professional Program

It's a licensed program, but it's the cure for USB sticks. More robust than most programs, it can do everything for your USB stick. Partitioning, formatting, creating and deleting partitions, etc.. this program that you can do things will be your remedy.

You need to buy the licensed version of the program or find and download it from the internet. Because the unlicensed version of the program is useless.

  • Program Download and install it.
  • Open the program and right-click on your USB stick delete chapter choose
Windows Could Not Finish Formatting AOMEI Partition
Windows Couldn't Finish Formatting
  • When you choose to delete a partition, the partition will not be deleted immediately. After you select Delete partition, you will see a different screen.
  • After deleting the partition, hover over your flash drive again Add Section Say it.
Windows Could Not Finish Formatting AOMEI Partition
Windows Couldn't Finish Formatting
  • After saying add partition, it asks how many partitions to create, continue without playing with any settings and click "Apply" on your flash drive. Then click on your flash drive again partition formatting choose
Windows Could Not Finish Formatting AOMEI Partition Full
Windows Couldn't Finish Formatting
  • And your disk is now available.
If you have done all this and your USB stick still doesn't click, then there is nothing to do. You can say goodbye to your USB stick by going to the nearest trash bin.

Ömer Bozdi

Don't be selfish with knowledge so that it multiplies.

Related Articles

4 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
en_USEnglish

Adblock Detected

Please SUPPORT us by turning off the Ad Blocker.